Se latelang se mabapi leMollo booster le voltage stabilizing thepa e feletsengLintlha tse qaqileng le litlhaloso tsa tataiso ea khetho:

1.Mollo booster le voltage stabilizing thepa e feletsengTlhaloso ea motheo ea

Mollo booster le voltage stabilizing thepa e feletsengKe sete sa lisebelisoa tse sebelisoang ka ho khetheha mekhoeng ea t?ireletso ea mollo, e etselitsoeng ho fana ka khatello e tsitsitseng ea metsi le ho phalla ho tiisa hore metsi a potlakile le a sebetsang hantle ha mollo o hlaha. Hangata sesebelisoa se kenyelletsapompo ea matla, litanka tsa khatello ea khatello, litsamaiso tsa taolo, liphaephe, li-valve le likarolo tse ling.

2.Sebopeho sa motheo le likarolo

2.1pompo ea matla

• mofuta:Pompo ea centrifugal ea mekhahlelo e mengata,Pompo ea centrifugal ea sethala se le seng,Pompo ea ho itlhahisaemela.
• Lintho tse bonahalang: T?epe ea t?epe, t?epe e sa hloekang, joalo-joalo.
• Mosebetsi: Fana ka khatello e hlokahalang ea metsi le ho phalla ho netefatsa hore tsamaiso ea t?ireletso ea mollo e ka fana ka metsi ka potlako ha mollo o hlaha.

2.2 Tanka ea khatello

• mofuta: Litanka tsa khatello, litanka tsa diaphragm, joalo-joalo.
• Lintho tse bonahalang: T?epe ea carbon, t?epe e sa hloekang, joalo-joalo.
• Mosebetsi: Ho tsitsisa khatello ea tsamaiso, fokotsa palo ea pompo e qalang, le ho lelefatsa bophelo ba t?ebeletso ea pompo.

2.3 Sistimi ea taolo

• mofuta: Taolo ea PLC, taolo ea relay, joalo-joalo.
• Mosebetsi: Laola ka tsela e iketsang ho qala le ho emisa ha pompo, hlokomela khatello ea tsamaiso le ho phalla, 'me u netefatse hore tsamaiso e ka sebetsa ka mokhoa o tloaelehileng ha ho chesa.

2.4 Liphaephe le li-valve

• Lintho tse bonahalang: T?epe ea carbon, t?epe e sa hloekang, PVC, joalo-joalo.
• Mosebetsi: Hokela likarolo tse fapaneng ho laola tataiso le phallo ea phallo ea metsi ho netefatsa ts'ebetso e tloaelehileng ea sistimi.

3.Molao-motheo oa ho sebetsa

Mollo booster le voltage stabilizing thepa e feletsengfetisapompo ea matlaFana ka khatello e hlokahalang ea metsi le ho phalla, tanka ea khatello e sebelisetsoa ho tsitsisa khatello ea tsamaiso, 'me tsamaiso ea taolo e itlhokomela le ho fetola boemo ba tsamaiso ea tsamaiso. Ha khatello ea tsamaiso e le tlase ho feta boleng bo behiloeng, tsamaiso ea taolo e qalapompo ea matla, ho fana ka khatello e hlokahalang ea metsi ha khatello ea tsamaiso e fihla ho boleng bo behiloeng, tsamaiso ea taolo e emisapompo ea matla, ho boloka ts'ebetso e tsitsitseng ea tsamaiso.

4.Litekanyetso tsa ts'ebetso

4.1 Phallo (Q)

• tlhaloso: Palo ea mokelikeli o fanoang ke thepa ka nako ea yuniti.
• unit: Cubic metres ka hora (m?/h) kapa lilithara ka motsotsoana (L/s).
• bophara: Ka tloaelo 10-500 m?/h, ho it?etlehile ka mohlala le t?ebeliso ea thepa.

4.2 Phahamisa (H)

• tlhaloso: Sesebelisoa se ka phahamisa bophahamo ba mokelikeli.
• unitLimithara (m).
• bophara: Hangata limithara tse 50-500, ho it?etlehile ka mohlala le t?ebeliso ea thepa.

4.3 Matla (P)

• tlhaloso: Matla a mochine oa thepa.
• unit: kilowatt (kW).
• Mokhoa oa ho bala:( P = \frac{Q \ linako H}{102 \nako \eta} )
  • (Q): sekhahla sa phallo (m?/h)
  • (H): Phahamisa (m)
  • (\le):pompakatleho (hangata 0.6-0.8)

4.4 Sebetsa (η)

• tlhaloso: Matla a ho fetola matla a sesebelisoa.
• unit:peresente(%).
• bophara: Hangata 60% -85%, ho it?etlehile ka moralo le t?ebeliso ea thepa.

5.Linako tsa kopo

5.1 Mokhoa oa ts'ireletso ea mollo oa meaho e phahameng

• tshebediso: Ho fana ka meaho e phahamengphepelo ea metsi a mollo.
• phalla: Hangata 10-200 m?/h.
• Phahamisa: Hangata ke limithara tse 50-300.

5.2 Mokhoa oa ho sireletsa mollo oa indasteri

• tshebediso: E sebelisoa tlhahiso ea indasteriphepelo ea metsi a mollo.
• phalla: Hangata 20-300 m?/h.
• Phahamisa: Hangata ke limithara tse 50-500.

5.3 Mokhoa oa t?ireletso oa mollo oa masepala

• tshebediso: e sebelisoang litoropongphepelo ea metsi a mollotsamaiso.
• phalla: Hangata 30-500 m?/h.
• Phahamisa: Hangata ke limithara tse 50-400.

6.Tataiso ea khetho

6.1 Etsa qeto ea litekanyetso tsa tlhokahalo

• Phallo (Q): E khethiloe ho latela litlhoko tsa sistimi, yuniti ke li-cubic metres ka hora (m?/h) kapa lilithara motsotsoana (L/s).
• Phahamisa (H): E khethiloe ho ea ka litlhoko tsa tsamaiso, yuniti ke mitha (m).
• Matla(P): Bala tlhoko ea matla a pompo ho latela sekhahla sa phallo le hlooho, ka li-kilowatts (kW).

6.2 Kgetha mofuta wa pompo

• Pompo ea centrifugal ea mekhahlelo e mengata: E loketse litlhoko tse phahameng tsa ho phahamisa, ts'ebetso e phahameng le ts'ebetso e tsitsitseng.
• Pompo ea centrifugal ea sethala se le seng: E loketse litlhoko tsa ho phahamisa tse mahareng le tse tlase, ka sebopeho se bonolo le tlhokomelo e bonolo.
• Pompo ea ho itlhahisa: E loketse maemo ao ho ona mosebetsi oa ho it?ebetsa o hlokahalang, joalo ka ha mohloli oa metsi o sa tsitsa.

6.3 Khetha thepa ea pompo

• Lisebelisoa tsa 'mele oa pompo: Ts'epe ea t?epe, t?epe e sa hloekang, boronse, joalo-joalo, e khethiloeng ho latela ho bola ha seaplane.
• Lintho tse impeller: Ts'epe ea t?epe, t?epe e sa hloekang, boronse, joalo-joalo, e khethiloeng ho latela ho bola ha seaplane.

6.4 Kgetha letshwao le mohlala

• Khetho ea lebitso: Khetha mefuta e tsebahalang ho netefatsa boleng ba sehlahisoa le t?ebeletso ea kamora ho rekisa.
• Khetho ea mohlala: Khetha mofuta o nepahetseng o ipapisitseng le maemo a tlhokeho le mofuta oa pompo. Sheba libuka tsa lihlahisoa le lintlha tsa tekheniki tse fanoeng ke brand.

7.Tlhokomelo le tlhokomelo

7.1 Ho hlahlojoa khafetsa

• Sheba litaba:pompaBoemo ba ts'ebetso, khatello ea tanka e tsitsitseng ea khatello, boemo ba ts'ebetso ea sistimi ea taolo, ho tiisoa ha liphaephe le li-valve, joalo-joalo.
• Sheba khafetsa: Ho khothalletsoa ho etsa tlhahlobo e felletseng hang ka khoeli.

7.2 Tlhokomelo ea kamehla

• Boloka litaba: Hloekisa 'mele oa pompo le impeller, hlahloba le ho fetola litiiso, li-bearings tsa lubricate, tsamaiso ea ho laola, joalo-joalo.
• Khafetsa ea tlhokomelo: Ho kgothaletswa ho etsa tlhokomelo e felletseng ka dikgwedi tse ding le tse ding tse tsheletseng.

7.3 Ho rarolla mathata

• Liphoso tse tloaelehileng: Pompe ha e qale, khatello e sa lekaneng, phallo e sa tsitsang, ho hlōleha ha tsamaiso ea taolo, joalo-joalo.
• Tharollo: Rarolla mathata ho ea ka ketsahalo ea phoso, 'me u ikopanye le litsebi tsa litsebi bakeng sa ho lokisoa ha ho hlokahala.

Netefatsa hore o khetha e nepahetseng ka litataiso tsena tse qaqileng tsa khethoMollo booster le voltage stabilizing thepa e feletseng, ka hona ho finyella litlhoko tsa tsamaiso ea ts'ireletso ea mollo ka katleho le ho etsa bonnete ba hore e ka sebetsa ka mokhoa o tsitsitseng le ka bot?epehi maemong a t?ohanyetso.